Capable of processing signals, voice, and data
GL Communications Inc., a company dealing with telecom test and measurement solutions, announced that they have enhanced T3 E3 analyser to support T1 E1 frames transmission from within the software in addition to monitoring the data over T3 E3 lines
“GL’s T3 E3 Analyser is capable of processing signals, voice, and data full T3 (DS3) or E3 data streams, dropping and inserting T1 (DS1) or E1, and analysis of HDLC, ATM, Frame Relay, and PPP Protocols. It includes various signal testing capabilities for Unchannelised (Unstructured) and Channelised (Structured) T3 E3 Traffic”, said Vijay Kulkarni, CEO of GL Communications.
He further added, “A T3 line is an ultra-high-speed signal capable of transmitting data at rates up to 44.736 Mbps. An E3 signal is situated at the third level within the Plesiochronous Digital Hierarchy (PDH) and has a bit rate of 34.368 Mbps. The channelised option in the T3 E3 Analyser uses “software-only” approach to support direct access to all 2×28 T1s or 2×21 E1s or 2×16 E1s on a T3/E3 line per board for analysis and monitoring– all within a single PC, including differing T1/E1 framing formats, physical layer alarms, and payloads”.
GL also offers mTOP™ T3 E3 Rackmount variants, which includes the USB based T3 E3 Analyzer hardware unit combined with necessary PC interface (Intel i3/i7, 256GB HDD, 8GB memory, Win10 Pro 64 bit), making it suitable for high-density lab testing.
- Provides support for channelised T3 E3 to T1 E1
- Supports up to 28 T1s and 16 E1s channels per T3/E3 port, in total it supports up to 56 T1s and 32 E1s
- Analysis and generation of all 56 T1s (1.544 Mbps each), or 32 E1s (2.048 Mbps each)
- Analysis and generation of Fractional T1s and E1s, N x T1s or N x E1s features
- Supports monitoring and generation of T1/E1 alarms in channelised T3/E3 lines
- Comprehensive analysis and generation of voice, data, fax, protocol, analogue, and digital signals, including echo and voice quality testing
- Supports Protocol Analysis and simulation of all structured protocols – HDLC, ISDN Analysis over T3E3 Signals (56 T1s), CAS, and more
- Extracting T1s/E1s from multiple T3/E3 ports is supported.
- Physical Layer analyser to monitor T3/E3 and T1E1 line alarms and send SNMP traps to monitoring applications.